Does it fit the Touch 'n Go RFID tag?

Yes. The clip is sized for the standard TNG RFID tag (and similar e-toll tags). Slot the tag into the holder rather than sticking it on the glass.

Do I still need a transparent RFID sticker?

No. This clip-on holder grips the tag for you, so you do not need a separate pelekat lutsinar on the windscreen.

Will the suction cups hold in hot weather?

We use super-strong suction cups tested for windscreen use. Clean the glass first and press firmly. If it ever loosens, wipe the cup and glass and re-press for a fresh seal.

Can I move it to another car?

Yes. Because it mounts with suction cups, you can remove and reposition it on another vehicle without glue residue.

What is included in the set?

You get 2 acrylic plates (1 black and 1 clear) and 2 super-strong suction cups.

Will the RFID still scan through the holder?

The holder positions the tag on the windscreen for normal scanning at toll plazas. For best results, mount it within your usual RFID reading zone as advised by your toll operator.

RFID Tag Holder (Budget) | 亚克力汽车配件

4.3 (3 条评价)

1 / 7

数量

选择选项以查看价格再加 19 个可省 5%！

需要帮助？联系我们

全马配送 · 制作 2–5 个工作日 + 配送 1–7 个工作日

对这款产品有疑问？

WhatsApp 联系我们周一至周五 8am–5pm · 周六 8am–1pm

产品描述

用UMAKE这款经济型RFID标签支架，把您的Touch 'n Go RFID标签收纳得整齐又牢固。本产品由雪兰莪Balakong工厂直接生产，采用1.5mm亚克力制成。夹扣设计能将TNG RFID标签稳固夹在挡风玻璃上，不留胶痕，也无需另购透明贴纸。整套包含2块亚克力板（1黑1透明）及2个超强吸盘，安装干净利落，随时可调整位置。市面上不少便宜货到手时变形或吸盘松脱，而我们采用足够厚度的亚克力和经过测试的吸盘，即使在马来西亚的炎热天气下也能稳稳固定。非常适合不想把RFID标签直接贴在玻璃上的车主、经常换车的人，或想整理仪表台的您。安装只需几秒：把吸盘按在干净的挡风玻璃上，再插入标签即可。

配送与制造

在雪兰莪Balakong定制生产
工厂直销价格，无中间商
简单产品次日生产，标准2-5个工作日
马来西亚全国配送
满意保证 - 如有缺陷免费重做